VW PQ vs MQB Plugs: How to Choose the Right Head Unit Harness

Buying a TEYES head unit for your Volkswagen and seeing “PQ” or “MQB”? These names tell you which type of vehicle connection the wiring harness is designed for. Choosing the wrong one can leave you with a plug that does not fit, or a setup that cannot communicate correctly with the car.

The quick answer

Match the connector on your original radio to the correct harness. Do not choose PQ or MQB from the car’s year alone.

The dashboard can look right while the wiring behind it is different. If you cannot confidently match the plug, send us photos before ordering.

Identify your plug · Understand the parts · Choose a harness · Get help identifying it

First, look at the plug — not the dashboard

The illustration below makes the main layout differences easier to see. It is based on our existing PQ/MQB connector reference photos. Compare the arrangement of the sections inside the plug. The outer housing alone can look similar.

PQ versus MQB illustrated connector comparison, with labelled differences in the upper inserts and lower-right section
Connector identification illustration. Tap the graphic to enlarge. Compare the overall layout; use the original photos below to check the actual connector. This is not an electrical pinout.
See the original connector reference photos
Original TEYES connector comparison: two PQ examples on the left and MQB example on the right
Left and centre: PQ examples. Right: MQB example. These are original reference photos. Match the socket sections, plastic guides and locking arrangement; insert colours can vary.

What is different in these photos?

  • PQ, centre photo: one blue insert sits at the upper left, with an open section beside it at the upper right. The lower sections include the yellow insert and the area with round openings.
  • MQB, right photo: two inserts sit across the top — blue and green in this example — and a pale rectangular insert appears at the lower right.

Use those positions to compare the examples, then check the complete layout. The colours are visual clues in these photographs, not a universal colour code. If your connector differs from both, send a photo rather than guessing.

Look inside the connector

Compare the positions and shapes of the large and small socket sections. A straight-on photo is much more useful than a photo of the wires from behind.

Check the radio as well

Photograph the matching socket on the factory radio and its model/part-number label. This helps us distinguish systems that look similar from the front.

Do not decide by colour or by counting connected wires. Not every cavity is populated, and different audio packages can use different inserts. A connector photograph is for identifying the harness family; it is not a pin-by-pin wiring instruction.

What do PQ and MQB actually mean?

PQ and MQB are names associated with Volkswagen Group vehicle platform families. In head unit listings, they are also used to distinguish the corresponding wiring harness and CANBUS options.

Think of the harness as a translator cable: one end connects to the car, and the other connects to the replacement head unit. The car-side connection and the communication interface must suit the original system.

“My car is a 2015 model. Which one do I need?”

The year is a starting clue, not proof. Model generations, markets, factory radio options and previous conversions can differ. There is no reliable universal rule that every car before 2015 is PQ and every car after 2015 is MQB. Check the actual connector.

Three different parts people often mix up

  1. The fascia and head unit: the screen and surrounding trim must physically suit your dashboard. A matching dashboard shape does not confirm the wiring.
  2. The wiring harness: the cable assembly connects the vehicle’s factory plug to the replacement system. This is where the PQ/MQB choice matters physically.
  3. The CANBUS decoder: the small interface box helps the head unit interpret supported vehicle signals, such as ignition status or steering wheel controls. It must suit the vehicle, harness and head unit setup.

A software setting cannot change the shape of a plug. Equally, a plug fitting into a socket does not prove that the decoder, wiring and retained features are all correct.

TEYES MQB harness on the left and PQ harness on the right
TEYES MQB and PQ harness examples. Cable routing, labels and supplied components can vary by kit; confirm the exact head unit and vehicle before ordering.

How to check your vehicle in five steps

  1. Write down the vehicle details. Include the model, build year, market and original audio system. Mention a factory amplifier, factory camera or any previous radio conversion.
  2. Locate the original radio connection. Depending on the vehicle, the main radio module may be behind the dashboard or elsewhere, such as the glovebox. Photograph the connection at the actual radio module. Ask an installer if you are unsure how to access it.
  3. Take clear photos. With the vehicle safely powered down and the connector released correctly, photograph the plug face, the radio socket and the radio’s part-number label. Never force the locking lever or pull on the wires.
  4. Compare the layout. Hold the photo in the same orientation as the reference. Check the socket sections, keying and latch. Do not rely on a blurred side view or the colour of one insert.
  5. Confirm the package. Check the product’s fitting notes and selected harness option. If anything differs, send your photos to TEYES before purchasing or modifying wiring.

Which harness should I select?

Your connector matches PQ

TEYES Volkswagen PQ wiring harness and CANBUS decoder

Select the For VW PQ option after confirming it suits your exact vehicle and TEYES model.

View PQ harness

Your connector matches MQB

TEYES Volkswagen MQB wiring harness with close-up of its connector

Select the For VW MQB option after confirming it suits your exact vehicle and TEYES model.

View MQB harness

Some vehicle listings supply PQ wiring as standard and ask customers to identify an MQB connection before ordering. Read the fitting notes for your particular listing. Do not assume that every TEYES Volkswagen package includes both harnesses, or that this cable suits every TEYES model.

What the correct plug does — and does not — confirm

Item What still needs checking?
Main power/data harness PQ or MQB connector layout, exact head unit compatibility and matching decoder.
Steering wheel controls and vehicle information Supported vehicle signals, decoder compatibility and the correct configuration for that decoder.
Factory amplified audio Whether the original amplifier needs a retention interface or a particular audio connection.
Factory reverse camera Camera signal type, power requirements and the appropriate retention adapter. PQ/MQB alone does not confirm camera compatibility.
Radio antenna The separate aerial connector and any required adapter or powered antenna connection.
Factory microphone and USB Separate compatibility and retention requirements. They are not automatically retained by choosing the main harness.

If something does not fit or work

The new harness will not plug into my car

Stop and compare the connector faces. Check whether you have the correct PQ/MQB option, whether the locking lever is released, and whether an adapter from a previous installation is still attached. Do not trim the housing, force the plug or move pins to make it fit. Send photos of both connectors to us.

The radio fits, but steering wheel controls or ignition behaviour is wrong

Check the harness and CANBUS decoder labels against the supplied kit instructions. The decoder and its settings must match the installation. Do not choose a random CANBUS profile or alter permanent-power wiring to hide the symptom. Ask TEYES to check the exact setup.

The head unit starts, but I have no sound

Tell us whether the vehicle has a factory amplifier. A working screen does not confirm that the amplifier’s audio path and turn-on connection have been retained correctly. Include photos of the original radio label, harness and decoder.

The reverse camera or antenna does not work

These use separate connections and may require their own adapters. Confirm the original camera system or aerial plug rather than changing the PQ/MQB option as a guess.

Common questions

Are PQ and MQB plugs interchangeable?

Do not treat them as interchangeable. Select the harness and decoder intended for the actual factory connection and your replacement head unit.

Can I tell from the radio’s front panel?

A front-panel photo helps identify the original system, but it does not show the connector. Include the rear socket and part-number label for a useful compatibility check.

My model and year match the listing. Why does my plug look different?

Factory equipment and production variations can differ within a model range. Previous aftermarket installations can also leave extra adapters behind. The actual factory connection is the final check.

Does a newer TEYES screen mean I need MQB?

No. The car-side harness choice is based on your vehicle’s original connection. The replacement TEYES model must also be checked so the complete cable and interface are compatible.

Not sure? Send these photos before ordering

Use this checklist when contacting TEYES:

  • Vehicle model, build year and market.
  • A photo of the original dashboard and radio.
  • A sharp, straight-on photo of the main factory plug face.
  • A photo of the matching socket and model/part-number label on the original radio.
  • The TEYES product link or model you want to install.
  • Any existing harness and CANBUS decoder labels, plus details of factory amplified audio or a reverse camera.

Example message: “I have a [year/model] with the original [radio/audio system]. I want to fit [TEYES model/product link]. Here are photos of the factory plug, radio socket and label. Can you confirm whether I need PQ or MQB wiring and any separate retention adapters?”

Find our contact details through the Technical Portal. For fitting references, visit Installation Manuals or the OEM Head Unit Pinouts finder. A pinout is a wiring reference; it does not replace checking the exact radio and connector.

Before you order: check the plug, confirm the harness and decoder, then check any camera, amplifier or antenna adapters. If the photos do not clearly match, let us identify the connection first.