Alpine Aftermarket Radio Pinouts
Match the model and connector orientation to your radio. Verify the battery, accessory and ground circuits before applying power.
Current pinouts
Alpine CDE-9802RB, CDA-9815RB, IVA-D105R
CDE-9802RB / CDA-9815RB
CDE-9802RB / CDA-9815RB. The IVA-D105R has a separate table because its illumination cavity differs.
| Pin Number | Color | Description |
|---|---|---|
| 1 | Red | Switched power (ignition) lead |
| 2 | Pink/Black | Audio interrupt in lead |
| 3 | Orange | ILLumination |
| 4 | Gray | Front SP (R) + |
| 5 | Gray/Black | Front SP (R) - |
| 6 | White | Front SP (L) + |
| 7 | White/Black | Front SP (L) - |
| 8 | Black | Ground lead |
| 9 | Blue | Power antenna lead |
| 10 | Blue/white | Remote turn-on lead |
| 11 | n/c | |
| 12 | Violet | Rear SP (R) + |
| 13 | Violet/Black | Rear SP (R) - |
| 14 | Green | Rear SP (L) + |
| 15 | Green/Black | Rear SP (L) - |
| 16 | Yellow | Battery lead |
IVA-D105R
IVA-D105R. The source lists cavity 3 as unconnected.
| Pin Number | Color | Description |
|---|---|---|
| 1 | Red | Accessory |
| 2 | Pink/Black | Audio interrupt in lead |
| 3 | n/c | |
| 4 | Gray | Front SP (R) + |
| 5 | Gray/Black | Front SP (R) - |
| 6 | White | Front SP (L) + |
| 7 | White/Black | Front SP (L) - |
| 8 | Black | Ground lead |
| 9 | Blue | Power antenna lead |
| 10 | Blue/white | Remote turn-on lead |
| 11 | Yellow/Blue | Parking brake |
| 12 | Violet | Rear SP (R) + |
| 13 | Violet/Black | Rear SP (R) - |
| 14 | Green | Rear SP (L) + |
| 15 | Green/Black | Rear SP (L) - |
| 16 | Yellow | Battery lead |
Alpine NVE-N077P
13-contact display output
The Alpine installation manual shows the keyed TO DISP. port on the rear of the navigation unit. The reported display wire list below uses reference numbers whose locations on that port are still unverified.
Reported display signals and cable colours
- 1 · Shield
- Audio return. Some documentation labels it data ground.
- 2 · Shield
- Video ground
- 3 · Shielded brown
- Mono voice guidance output
- 4 · Red
- Voice guidance control
- 5 · Shielded black
- Composite video output
- 6 · Brown
- Remote control data
- 7 · Grey
- Display control / EXTX data out
- 8 · Shielded green
- Red video
- 9 · Shielded mauve
- Blue video
- 10 · White
- Reported +5 V
- 11 · Light blue
- EXRX data in
- 12 · Pink
- Composite sync
- 13 · Shielded blue
- Green video
10-contact power and control socket
| Cavity | Cable colour | Function |
|---|---|---|
| 1 | Black | Ground |
| 2 | Red | Accessory +12 V |
| 3 | Pink / sky blue | Mute |
| 4 | — | Open |
| 5 | — | Open |
| 6 | Yellow | Permanent battery +12 V |
| 7 | White / blue | Illumination input |
| 8 | Green / white | Vehicle speed signal |
| 9 | Yellow / blue | Parking brake input |
| 10 | Orange / white | Reverse input |
Legacy pinouts
Acura / Alpine CD changer
Eight-way CD changer port
Acura / Alpine CD changer interface. Applies to the interface shown in the legacy source.
| Cavity | Acura cavity | Circuit |
|---|---|---|
| 1 | 1 | Changer bus |
| 2 | 4 | Audio return |
| 3 | 3 | Bus return |
| 4 | 2 | Right audio signal |
| 5 | 5 | Left audio signal |
| 6 | 6 | Permanent battery +12 V |
| 7 | 7 | Accessory supply |
| 8 | 8 | Ground |
Alpine 7190M
Main power and speaker block
Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A1 | RF+ |
| A2 | LF+ |
| B1 | RF− |
| B2 | LR− |
| C1 | RR− |
| C2 | LF− |
| D1 | RR+ |
| D2 | LR+ |
| F1 | ACC |
| G1 | BATT |
| I1 | GND |
Separate line and amplifier block
Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A2 | LINE-L |
| B2 | LINE-R |
| C2 | LINE-GND |
| H2 | REM |
Alpine 7293JS
Main connector
Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A1 | L-COM |
| A2 | LR |
| A3 | L-COM |
| A4 | LF |
| A5 | R-COM |
| A6 | Right rear speaker |
| A7 | R-COM |
| A8 | RF |
| B1 | GND |
| B2 | BATT |
| B3 | ACC |
| B4 | ANT |
| B5 | ILL |
| B6 | REM |
| B7 | MUTE |
Alpine 7397J
Main connector
The service photograph labels the permanent battery feed at two positions. The table covers the identified power contacts. Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A1 | ACC |
| A2 | BATT |
| A3 | ANT |
| B1 | GND |
| B2 | BATT |
Alpine AI-Net Model CDA
Ai-NET socket
The metal shell is grounded. The diagram labels the numbered terminals shown.
| Cavity | Circuit |
|---|---|
| 4 | Left audio |
| 5 | Right audio |
| 6 | Ai-NET data |
| 7 | Ai-NET ground |
| 8 | Ai-NET data |
| 10 | Supply +12 V |
| 12 | Audio ground |
Alpine ALfa Romeo 932 RDS
ISO A · power and control
The chassis photo identifies the front speaker circuits.
| Cavity | Circuit |
|---|---|
| A2 | Mute |
| A4 | S-K (source label) |
| A5 | Antenna control |
| A6 | Lamp |
| A7 | Switched accessory +12 V |
| A8 | Ground |
ISO B · speakers
| Cavity | Circuit |
|---|---|
| B3 | Right front + |
| B4 | Right front − |
| B5 | Left front + |
| B6 | Left front − |
Alpine AUK-8613
Main connector
Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A1 | RF+ |
| A2 | LF+ |
| A3 | RR+ |
| A4 | LR+ |
| A5 | NC |
| A6 | NC |
| A7 | NC |
| A8 | ANT |
| A9 | BATT |
| A10 | ACC |
| B1 | RF− |
| B2 | LF− |
| B3 | RR− |
| B4 | LR− |
| B5 | ANT-B+ |
| B6 | REM |
| B8 | NC |
| B9 | ILL |
| B10 | GND |
13-way accessory socket
Front view of the numbered diagram.
| Cavity | Circuit |
|---|---|
| 1 | No connection |
| 2 | Right audio output |
| 3 | Right audio input |
| 4 | Left audio output |
| 5 | Left audio input |
| 6 | Audio ground |
| 7 | Remote |
| 8 | Mute |
| 9 | Signal ground |
| 10 | Permanent battery feed |
| 11 | Blank |
| 12 | Illumination |
| 13 | No connection |
Alpine CDA 7969
Main connector
Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A1 | BATT |
| A7 | REM |
| A8 | ANT |
| B1 | GND |
| B6 | ILL |
| B7 | MUTE |
| B8 | ACC |
Alpine IVA-D100R
10-way power and control socket
The separate 10-way connector on the IVA-D100R uses different wiring from other Alpine models.
| Cavity | Circuit |
|---|---|
| 1 | Accessory +12 V |
| 2 | Audio interruption input |
| 3 | No connection |
| 4 | Reverse input |
| 5 | Ground |
| 6 | Power antenna control |
| 7 | Amplifier turn-on |
| 8 | Parking brake input |
| 9 | AUX1 remote output |
| 10 | Permanent battery +12 V |
Alpine M-Bus 5957, 5952V, CHM-S600, S601, S611, S620
Eight-way M-Bus port
Alpine M-Bus connector. Use the specified changer model and harness.
| Cavity | Circuit |
|---|---|
| 1 | Changer bus |
| 2 | Audio ground |
| 3 | Bus ground |
| 4 | Right audio output |
| 5 | Left audio output |
| 6 | +12 V |
| 7 | +12 V |
| 8 | Ground |
Alpine TDE-7823W
Main connector
Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A1 | BATT |
| A2 | LR− |
| A3 | LR+ |
| A4 | RR− |
| A5 | RR+ |
| A7 | REM |
| A8 | ANT |
| B1 | GND |
| B2 | LF− |
| B3 | LF+ |
| B4 | RF− |
| B5 | RF+ |
| B8 | ACC |
Alpine TDM-7990E
Main connector
Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A1 | ANT |
| A2 | RR− |
| A3 | LR− |
| B1 | ACC |
| B2 | RR+ |
| B3 | LR+ |
| C1 | BATT |
| C2 | LF− |
| C3 | RF− |
| D1 | GND |
| D2 | LF+ |
| D3 | RF+ |
Alpine USB iPod connection for iDA-x001,100,200,300
USB-A plug
The cable also ties the dock AUDIO_SW contact to USB ground.
| Cavity | Circuit |
|---|---|
| 1 | USB supply +5 V |
| 2 | USB data − |
| 3 | USB data + |
| 4 | USB ground |
30-way iPod dock plug
Reference applies to Alpine interface lead 09-09244Z01.
| Cavity | Circuit |
|---|---|
| 11 | AUDIO_SW to USB ground |
| 16 | USB ground |
| 23 | USB supply +5 V |
| 25 | USB data − |
| 27 | USB data + |
| 21 | Accessory detect through 191 kΩ to USB ground |