Kenwood Aftermarket Radio Pinouts

Match the model and connector orientation to your radio. Verify the battery, accessory and ground circuits before applying power.

Current pinouts

Kenwood DMX8021DABS

22-way power and speaker header

The numbered connector drawing and main connector map agree. The antenna leads are identified separately at pins 19 and 20.

22212019181716151413121110987654321
Main radio header, terminal face
Pin Num Wire Color Signal
1 G RL+ | REAR DOOR SPEAKER L
2 G-B RL- | REAR DOOR SPEAKER L
3 V-B RR- | REAR DOOR SPEAKER R
4 V RR+ | REAR DOOR SPEAKER R
5 V-W REV | REVERSE LIGHT
6 LG PRKSW | PARKING BRAKE
7 LB-Y REMO | REMOTE CONTROL
8 NC
9 BR MUTE | MUTE CONTROL
10 O-W ILL+ | DIMMER
11 Y B+ | +12V Battery
12 W FL+ | FRONT DOOR SPEAKER L
13 W-B FL- | FRONT DOOR SPEAKER L
14 GR-B FR- | FRONT DOOR SPEAKER R
15 GR FR+ | FRONT DOOR SPEAKER R
16 G-W CAM- | CAMERA CONTROL -
17 G-R CAM+ | CAMERA CONTROL +
18 PK S SENS | SPEED PULSE INPUT
19 L-W ANT | ANT CONT Antenna Amplifier Supply (1)
20 L-W ANT2 | ANT CONT Antenna Amplifier Supply (2)
21 R ACC | +12V ACC Supply
22 B GND | GROUND
Kenwood Head Unit Auxilliary Input (CA-C1AUX)

13-way CD changer input

For the CA-C1AUX analogue input lead. The two RCA centres are separate channels with a shared return.

13910111256781234
Connector face in the numbered reference orientation
Cavity Circuit
6 Common audio return to RCA sleeves
8 Right audio input from RCA centre
12 Left audio input from RCA centre
Kenwood KDC-7070R, KDC-5040R, KRC-958R, KRC-689, KRC-553

KDC-7070R connector face

The KDC-7070 diagram shows this layout. Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.

A1A2A3A4A5A6A7A8B1B2B3B4B5B6B7B8
Connector face in the reference orientation
Position Circuit shown on reference
A1 GND
A2 ACC
A3 ANT
A5 RF+
A6 RF−
A7 LF−
A8 LF+
B1 BATT
B2 ILL
B3 MUTE
B4 EXT
B5 RR+
B6 RR−
B7 LR−
B8 LR+

KRC-553 connector face

The KRC-553 diagram shows a different layout. Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.

A1A2A3A4A5A6A7A8B1B2B3B4B5B6B7B8
Connector face in the reference orientation
Position Circuit shown on reference
A1 GND
A2 BATT
A4 ANT
A5 RF+
A6 RF−
A7 LF+
A8 LF−
B1 ACC
B5 RR+
B6 RR−
B7 LR+
B8 LR−
Kenwood KDC-84R, KDC-94R

Deck interface with line-level outputs

KCA-980 deck cradle. The stereo input and the front/rear assignment of the line outputs are unspecified in the numbered harness reference.

109876543212019181716151413121128272625242322213635343332313029
Connector face in the reference orientation
Cavity Circuit
1 Audio input A (left)
2 Input return for 1 and 11
7 Left line output
8 Right line output
9 Right line output
10 Left line output
11 Audio input A (right)
17 Return for line output 7
18 Return for line output 8
19 Return for line output 9
20 Return for line output 10
25 Power ground
26 Switched +12 V
27 Amplifier control output
33 Permanent +12 V
34 Illumination
Kenwood KRC-X70

Main connector

Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.

A1A2A3A4A5A6A7B1B2B3B4B5B6B7
Radio socket viewed from the rear
Position Circuit shown on reference
A1 BATT
A2 ACC
A4 RF+
A5 RF−
A6 LF+
A7 LF−
B1 GND
B3 ANT
B4 RR+
B5 RR−
B6 LR+
B7 LR−
Kenwood KRC-X727

Main connector

Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.

A1A2A3A4A5A6A7A8B1B2B3B4B5B6B7B8
Connector face in the reference orientation
Position Circuit shown on reference
A2 ANT
A3 BATT
A4 ACC
A5 RR+
A6 RF+
A7 LF+
A8 LR+
B4 GND
B5 RR−
B6 RF−
B7 LF−
B8 LR−
Kenwood KRC-X770

Main connector

Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.

A1A2A3A4A5A6A7A8B1B2B3B4B5B6B7B8
Connector face in the reference orientation
Position Circuit shown on reference
A3 BATT
A4 ACC
A5 LF+
A6 RF+
A7 LR+
A8 RR+
B1 ANT
B4 GND
B5 LF−
B6 RF−
B7 LR−
B8 RR−
Kenwood Mini-jack 3.5 to RCA adapter

3.5 mm A/V plug

CA-C3AV. From tip to cable, the order is left audio, right audio, common return, then video.

4321
Side view, cable at left
Contact Circuit
1 Left audio (tip)
2 Right audio (first ring)
3 Common return (second ring)
4 Composite video (sleeve)

Legacy pinouts

CD changer old 13 pole connector

13-way CD changer port

Older Kenwood CD changer interface. Match the changer’s harness and connector before comparing with other 13-way interfaces.

13910111256781234
Connector face in the numbered reference orientation
Pin Number Pin Name Description (may be empty)
1 CH-REQH Request output to changer; Low : Request
2 GND
3 Vcc +12V
4 CH-CON Changer control out; High : Operation mode Low : Standby
5 CH-MUTE Mute request from changer; High : Mute
6 AGND Audio Ground
7 CH-RST Reset output to changer
8 R Audio right channel
9 CH-REQC Request input from changer; Active Low
10 CH-DATAC Data input from changer
11 CH-DATAH Data output to changer
12 L Audio left channel
13 CH_CLK Clock input/output for changer
Kenwood FKR-GX33 (SUBARU)

Speaker socket

Photographed FKR-GX33 socket. The central lower position is a locator rather than a terminal. Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.

A1A2A3A4A5B1B2B4B5
Connector face in the reference orientation
Position Circuit shown on reference
A1 RF−
A2 LF−
A4 LR−
A5 RR−
B1 RF+
B2 LF+
B4 LR+
B5 RR+

Power socket

Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.

A1A2A3A4B1B2B4
Connector face in the reference orientation
Position Circuit shown on reference
A1 GND
A2 ILL-
A3 ANT
B1 ACC
B2 ILL+
B4 BATT
Kenwood GX-505AF

Main connector

Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.

A1A2A3A5A6A7B1B2B3B4B5B6B7B8
Connector face in the reference orientation
Position Circuit shown on reference
A1 ACC
A2 LR+
A3 RR+
A5 LF+
A6 RF+
A7 ILL
B1 ANT
B2 LR−
B3 RR−
B4 GND
B5 BATT
B6 LF−
B7 RF−
Kenwood KRC-1054R

Main connector

The source names input channels. Contact identities marked without a label are omitted. Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.

A1A2A3A4A5A6A7A8A9A10A11A12A13A14B1B2B3B4B5B6B7B8B9B10B11B12B13B14C1C2C3C4C5C6C7C8C9C10C11C12C13C14D1D2D3D4D5D6D7D8D9D10D11D12D13D14
Connector face in the reference orientation
Position Circuit shown on reference
A1 ANT-GND
A2 LINE-IN-FR
A3 LINE-IN-RR
A9 BATT
B1 ANT
B3 LINE-IN-FL
B4 LINE-IN-RL
B8 GND
C2 LINE-IN-L
D2 LINE-IN-R
Kenwood KRC-265

Main connector

Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.

A1A2A3A4A5A6A7A8B1B2B3B4B5B6B7B8
Connector face in the reference orientation
Position Circuit shown on reference
A1 GND
A2 BATT
A3 REM
A5 RF+
A6 RF−
A7 LF−
A8 LF+
B1 ACC
B5 RR+
B6 RR−
B7 LR−
B8 LR+
Kenwood KRC-28YA

Main connector

Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.

A1A2A3A4A5A6A7A8B1B2B3B4B5B6B7B8
Connector face in the reference orientation
Position Circuit shown on reference
A1 GND
A2 BATT
A3 REM
A5 RF+
A6 RF−
A7 LF−
A8 LF+
B1 ACC
B5 RR+
B6 RR−
B7 LR−
B8 LR+
Kenwood KRC-3631

Main connector

Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.

A1A2A3A4A5A6A9B1B2B3B4B5B6B9
Connector face in the reference orientation
Position Circuit shown on reference
A1 RF+
A2 RF−
A3 RR+
A4 RR−
A5 GND
A6 ACC
A9 ANT
B1 LF+
B2 LF−
B3 LR+
B4 LR−
B5 BATT
B6 ANT-POWER
B9 ANT-GND
Kenwood KRC-477R

ISO A · power and control

Power and speaker blocks shown in the model reference. Where marked KL15/30, check the unit-specific feed configuration. The upper accessory block varies by chassis and equipment.

A1A3A5A7A2A4A6A8
Radio socket viewed from the rear · block A
Cavity Circuit
A1 Unlabelled in model drawing
A2 Unlabelled in model drawing
A3 Unlabelled in model drawing
A4 Permanent battery +12 V
A5 Powered antenna or switched control
A6 Illumination input
A7 Switched accessory +12 V
A8 Ground

ISO B · speakers

B1B3B5B7B2B4B6B8
Radio socket viewed from the rear · block B
Cavity Circuit
B1 Right rear speaker +
B2 Right rear speaker −
B3 Right front speaker +
B4 Right front speaker −
B5 Left front speaker +
B6 Left front speaker −
B7 Left rear speaker +
B8 Left rear speaker −
Kenwood KRC-654RD

Main connector

Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.

A1A2A3A4A5A6A7B1B2B3B4B5B6B7
Connector face in the reference orientation
Position Circuit shown on reference
A1 ILL
A2 ACC
A3 BATT
A4 LF+
A5 RF+
A6 LR+
A7 RR+
B1 ANT
B2 NC
B3 GND
B4 LF−
B5 RF−
B6 LR−
B7 RR−
Kenwood KRC-951R, KRC-852D/L, KRC-752R, KRC-453D/L, KRC-452D/L

Main connector

Radio-specific cradle wiring; verify the exact model suffix. Contacts labelled PHONE have no individual signal directions in the source. Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.

A1A2A3A4A5A6A7A8A9A10A11A12A13B1B2B3B4B5B6B7B8B9B10B11B12B13C1C2C3C4C5C6C7C8C9C10C11C12D1D2D3D4D5D6D7D8D9D10D11D12
Connector face in the reference orientation
Position Circuit shown on reference
A1 ANT-GND
A4 LINE-OUT-L
A8 ILL
A9 BATT
A10 LR−
A11 LR+
A12 LF+
A13 LF−
B1 ANT
B4 LINE-OUT-R
B7 ANT-CTRL
B8 ACC
B9 GND
B10 RR−
B11 RR+
B12 RF+
B13 RF−
C2 IN-L
C10 PHONE
D2 IN-R
D10 PHONE
Kenwood KRC-951RDS, KRC-851D, KRC-751D/L, KRC-651D/L, KRC-451D/L

Main connector

The source marks ranges of amplifier contacts. Those individual accessory positions remain unconfirmed. Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.

A1A2A3A4A5A6A7A8A9A10A11A12A13B1B2B3B4B5B6B7B8B9B10B11B12B13C1C2C3C4C5C6C7C8C9C10C11C12D1D2D3D4D5D6D7D8D9D10D11D12
Connector face in the reference orientation
Position Circuit shown on reference
A1 ANT-GND
A8 ILL
A9 BATT
A10 LR−
A11 LR+
A12 LF+
A13 LF−
B1 ANT
B8 ACC
B9 GND
B10 RR−
B11 RR+
B12 RF+
B13 RF−