CC4 PRO 360 Camera Activation Process
Before activation, please ensure the device is connected to the internet.
Go to Settings --> Display --> Set reverse camera to 360 Mode
What to check after activation
Use the unique activation code supplied with your CC4 Pro Digital 360 kit if prompted. After installation and calibration, check each camera view in a stationary vehicle and confirm that the overhead image joins cleanly around the corners. If a feed is missing or the stitched view is misaligned, check the installation and calibration before relying on the display.
See the CC4 Pro Digital 360 camera packages
Vehicle-specific confirmed outcomes
These outcomes were confirmed by customers for the installations described. Check the vehicle, decoder and head-unit details before applying a setting or replacing a part.
CC4 Pro 360: activation card code rejected
Symptom: The 360 activation card code was rejected and surround view remained unactivated.
Confirmed outcome: The customer confirmed successful activation after support supplied a replacement code.
What to check: If the normal activation process fails, contact support privately with the exact model, software version, purchase reference and a photo of the error. Support may need to check the activation card and device details.
Applies to this recorded installation: There is no public replacement code or bypass procedure. Do not post activation codes, serial numbers, purchase details or customer correspondence in the forum.