Mercedes-Benz CL 500 (C215) – Custom CC4 Pro Installation

W220 product warning

The product warning illustrates the front of the factory COMAND unit, its rear connectors and a boot amplifier. If your vehicle matches the pictured head unit and has the pictured amplifier, the standard W220 kit is incompatible with that setup. This 2002 CL 500 C215 case study uses custom fabrication and a modified harness.

W220 compatibility warning showing the factory COMAND unit front, rear connectors and boot amplifier

This case study follows the custom retrofit of a 10.36-inch T’EYES CC4 Pro in a 2002 CL 500 originally fitted with COMAND 2.5.

1. Plan the dashboard fit

Start with the factory radio and centre-stack layout. The standard frame is designed for 9–9.5-inch screens. A 10.2–10.36-inch screen requires custom fitting. For the 10.36-inch CC4 Pro shown here, the owner chose a recessed fit in the factory fascia and planned to CNC-machine the opening. Before cutting, mock up the exact screen and its mounts. Check the rear clearance, connector access and clearance around the original controls. The correspondence did not include a verified cut template or final installed dimensions.

Illustration of the CL 500 factory centre stack with twin air vents, walnut fascia, red hazard switch, COMAND screen and separate right-hand keypad
Factory COMAND 2.5 centre stack, recreated from the owner’s before photo. Look for the hazard switch between the two sets of rockers, the media keys above the screen, the separate numeric keypad and rotary control to its right, and the climate controls below. Button markings and screen graphics are illustrative. Use the actual fascia for measurements.

2. Choose what to retain from the original audio system

The owner reported removing the original TV tuner, Bose amplifier and CD changer from the boot and fitting an Axton A894DSP in the left-hand equipment area. He also reported modifying the T’EYES harness. His modified loom is pictured below.

Illustration of an aftermarket DSP amplifier mounted upright in the left side of the boot
Illustration based on the owner’s boot photo. Connector positions and mounting details are illustrative.
CC4 Pro → Optical audio cable → Axton A894DSP
Phone app → Bluetooth settings control → Axton A894DSP
Audio signal and app control paths reported by the owner.

In this build the CC4 Pro sends audio over an optical cable to the Axton. DSP and equaliser adjustments are made through the amplifier’s Bluetooth app. If you plan to retain your original amplifier or CD changer, confirm the appropriate interface for your factory configuration before ordering parts.

3. Standard kit wiring and compatibility

Clean illustration of the standard wiring kit with the wrapped loom on the left and the short harness, CANBUS decoder, antenna adapter and coiled cable on the right
Standard-kit wiring shown in a compact layout, with printed labels removed. For exact connector details, view the original kit photo.
  • Compare the factory radio, connectors and decoder with the wiring information for the exact car and head unit. The thread mentions an InCarTec 39-MB-COM2 interface, but it does not confirm that it works alongside the T’EYES decoder.
  • If you want dynamic parking lines, check that the selected decoder actually passes the steering-angle signal on your car. The owner requested this feature, and the thread does not confirm it was working.
  • Have an installer verify each connection using the vehicle wiring documentation before applying power. The owner’s amplifier pinout and loom photos appear below. Verify terminal orientation and circuit function on the actual vehicle before connecting anything.

4. The owner’s modified standard-kit harness

The owner adapted the loom supplied with the kit. In his photo, the exposed decoder board connects through a white plug and the black head-unit connector sits near the centre. The grey sealed plugs include one marked CAN L/H, one marked +/− and one with a lead marked KEY 2. A separate white plug is tagged for area C. The inline antenna adapter sits at the right, and several other leads have insulated ends.

Owner’s modified loom showing the decoder board, three grey sealed plugs with orange seals, black head-unit plug and inline antenna adapter
Modified loom, recreated from the owner’s photo

The labels below are transcribed from the original photo. Small markings and connector details in the recreation are approximate.

CAN · L / H
Left grey plug. Orange at L and white at H as marked in the photo.
+ / −
Middle grey plug. Yellow at + and black at − as marked in the photo.
KEY 2
Tag on an orange lead entering the right grey plug.
Insert this port into area C
Tag on the blue and white lead to the small white plug.

View the full reference photo · See the factory Bose amplifier pinout

Colours and markings describe this owner’s loom. Verify wire routes and terminal positions on the physical loom.

5. Owner’s Bose amplifier connector pinout

26-pin Bose amplifier plug · contact view from below
9 — 26 8 17 25 7 16 24 6 15 23 5 14 22 4 13 21 3 12 20 2 11 19 1 10 18

Bottom edge in the owner’s diagram

Blue · ground (9)   Red · battery positive (26)
Dark grey · not connected   Dashed · empty

Pins 1–9
Pin Function
1 Microphone positive
2 Microphone shield
3 Microphone negative
4 Not connected
5 Not connected
6 Not connected
7 Not connected
8 ST L wake-up
9 KL31 ground
Pins 10–26
Pin Function
10 Not connected
11 Rear speaker − (labelled Heck)
12 Not connected
13 Front left door speaker +
14 Front right door speaker −
15 Rear left door speaker −
16 Centre speaker +
17 Rear right door speaker −
18 Not connected
19 Rear speaker + (labelled Heck)
20 Not connected
21 Front left door speaker −
22 Front right door speaker +
23 Rear left door speaker +
24 Centre speaker −
25 Rear right door speaker +
26 KL30 battery positive

The rear speaker pair (19 / 11) is listed separately from the rear door pairs. The sheet labels it “Heck” and gives no speaker impedance or confirmation that the factory subwoofer was retained. This is the amplifier connector map. The modified head-unit loom above has separate connectors.

What was still open

The factory Bose subwoofer was still under evaluation. The owner was considering retaining it with a suitable amplifier or replacing it with a driver that fits the original space. The 360° camera fitting and calibration, and extra vehicle-control features, were planned later phases.

Finished dashboard installation

Installed CC4 Pro in the Mercedes-Benz CL 500 woodgrain centre console, below the factory rocker switches and above the climate controls
The owner’s finished dashboard. The 10.36-inch CC4 Pro sits in the modified woodgrain fascia, between the original switch row and the climate controls. This is the custom fit for the larger screen. The standard frame is sized for 9–9.5-inch screens. Select the photo for a closer look.