Mercedes-Benz NTG 4.0 — Harness Connection Guide
The NTG 4.0 layout identifies the LVDS/display connections, main power harness and pictured GPS/AMI and audio leads. Match the original NTG system and connector shapes.
NTG 4.0
Open the original full-size NTG 4.0 diagram ↗

Read the connection reference
- Identify your package. Match its letter, frame code or original radio-system name to the diagram heading. If more than one layout is shown, choose the one matching the actual supplied parts.
- Follow the labelled lines. The lines identify the photographed connector or lead. Check the printed labels on the cable as well as the connector shape; a guide line is not an instruction to join bare wires.
- Check the destination. Distinguish connections to the TEYES unit, original vehicle wiring and replacement frame. Do not force a plug or move pins to match a different diagram.
This is a harness connection reference, not a universal pin-by-pin electrical diagram or a complete trim-removal procedure. Follow the installation preparation guide and the instructions for your exact head unit.
If your connectors differ
Send TEYES your vehicle details, order number, selected package, original radio label, decoder label and clear photographs of both connector faces before modifying the wiring. Use TEYES Support for help identifying the correct reference.
Vehicle listings
Check the selected head-unit model and package on the listing. The diagram’s stated coverage still applies.