Teyes Australia - Performing Hard Factory Reset Teyes CC3 CC2 — Video Guide
Watch the TEYES Australia video for Teyes Australia - Performing Hard Factory Reset Teyes CC3 CC2. Use the demonstration and the related resources below to check the process against your own head unit and installed equipment.
Watch the original TEYES Australia video on YouTube ↗
About this demonstration
This demo will show you have to do a hard factory reset. You must have the Teyes firmware for your relevant Teyes unit ready on a USB stick. This will format your head unit completely and perform a fresh install.
If the unit reboots and has maintained the settings, please copy the Forced Firmware Reset file into the firmware package by over writing updatecfg.txt with the one downloaded from the link
Right Click on "Forced Firmware Reset" and click "save as" to download updatecfg.txt
Search for updatecfg.txt inside the firmware zip file and overwrite with this one.
Zip the file back up and copy to a FAT32 usb stick and follow this video.
Teyes CC3 CC2 Android Aftermarket Car Audio Head Unit Infotainment System
www.teyes.com.au
Match the demonstration to your unit
This guide is listed for CC3 / CC3 2K / CC2 / CC2 Plus. Identify your model, current software and any connected accessory before following the video. Menu names and available functions can change between hardware versions and firmware releases.
Check the result
Make changes with the vehicle stationary, note the original setting and test the intended function afterwards. If your menu differs or the symptom remains, use the written how-to guides or send TEYES Support your model and a clear description of the issue.